Products
Overglaze, Insulating & Sealing Dielectric Pastes
| Product | Purpose | Order Trial Quantity |
|
|---|---|---|---|
| 4031-B | RoHS-compliant sealing glass for use with alumina substrates, fires 550-625 °C |  |
 |
| 4604-A | Dielectric paste for use with 4605 to insulate aluminum substrates | |
|
| 4605 | Dielectric paste for use with 4604-A to insulate aluminum substrates | |
|
| 4606 | Dielectric paste for one-part insulation of aluminum substrates | |
|
| 4702 | Overglaze for resistors printed on 4924 dielectric, excellent acid resistance, fires 850 °C | |
|
| 4771-P2 | Resistor overglaze, shows excellent water resistance, fires 525-625 °C | |
|
| 4916 | Insulating dielectric, for 304-type austenitic stainless steel, contains barium | |
|
| 4924 | Insulating dielectric, for 430-type ferritic stainless steel | |
|
| 4931 | Dielectric designed to insulate ferritic steel, minimal bowing when used on 430 S17 grade stainless steel | |
|
| 4937 | High temperature overglaze with a glossy finish, suitable for both hybrid and some Heaters-on-Steel applications | |
|
| 4986 | Co-firing dielectric, for insulating 430-type ferritic stainless steel | |
|
| 4987 | For insulating thin 430-type ferritic stainless steel, improved warpage control | |
|
| G-485-2 | Acid-resistant resistor overglaze, for use on chip resistors and other components, fires 600 °C | |
|
| G-486-1 | Acid resistant overglaze, black version, for use on chip resistors and other components. | |
|
| 4022-F |
Low temperature (<510 °C) sealing glass | |
|
| 4026 | Sealing glass for alumina, fires 550-625 °C, also available green and blue | |
|
| 4026-A | Sealing glass for alumina, fires 700-730 °C | |
|
| 4774-BCG | Overglaze, for use with laser trimming, fires at 525-565 °C | |
|
| 4909-MOD | Wear-resistant overglaze, for use on thermal print heads, 850 °C | |
|
| G-481 | Acid-resistant overglaze, excellent silver migration protection, green, 600 °C | |
|
| G-482 | Black version of G-481 overglaze | |
|
| G-484 | White version of G-481 overglaze | |
|
Green Products are Lead-Free, Cadmium-Free
The above ESL materials are representative of the most common market requirements. The front-side and back-side silvers are available in a number of versions, depending on factors such as the type of silicon (single crystal, poly- or multi-crystalline, etc.), the nature of the anti-reflective coating (silicon nitride, titanium dioxide, etc.) and the paste application method (screen printing, etc.)
The above ESL materials are representative of the most common market requirements. The front-side and back-side silvers are available in a number of versions, depending on factors such as the type of silicon (single crystal, poly- or multi-crystalline, etc.), the nature of the anti-reflective coating (silicon nitride, titanium dioxide, etc.) and the paste application method (screen printing, etc.)